Specifications
| Total Caliper: | 5 mil |
| Basis Weight: | 200 g/m2 |
| Whiteness: | 96 |
| Brightness: | 94 |
| Opacity: | 95 |
| Gloss Level: | 45@60° |
| Inkset: | Eco solvent (Eco-SOL MAX) |
| Adhesive: | N/A |
| Backing: | None |
Applications
- Posters and Presentations
- POP Displays
- Tradeshow Graphics
- Window Graphics
- Fine Art/Photographic
Available Sizes
52″
41″
Storage and Usage
PQM-PETG must be handled with care before and after printing to prevent surface contamination that could ruin the print. This film should be processed in an environment of between 18 ° and 85 ° F (18 ° C and 30 ° C) and a relative humidity of between 30% and 70% (non-condensing) that is clean and relatively free of dust. Use the lowest possible head position to produce better quality results. In addition, some material is fixed tightly in the nucleus, and care must be taken to avoid problems with the machine due to clogging of the material at the end of the roll. Store this product in its original container in a cool, dry area until you are ready to be processed. If the storage conditions are outside the recommended operating range, allows the film to acclimate in the specific range at least between 24 to 48 hours before use.
