|
|
DWX-52DCi |
| Cuttable material |
Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal |
| Loadable workpiece shape |
Step section: |
98.5 mm (diameter), height 10 mm |
| Body section: |
95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm |
| Pin diameter: |
6 mm |
| Loadable workpiece weight |
Up to 850 g |
| Number of adapters housed |
6 |
| Operating speed |
XYZ axis: |
0.24 to 70.9 in./min.(6 to 1,800 mm/min.) |
| Spindle motor |
Brushless DC Motor |
| Spindle speed |
6,000 to 30,000 rpm |
| Rotary axis travel angle |
A: |
±360° |
| B: |
±30° |
| Number of burs housed |
15 |
| Attachable bur |
Shank diameter: |
4 mm |
| Length: |
40 to 55 mm |
| Compatible compressed air |
0.2 MPa |
| Interface |
USB |
| Control command set |
RML-1, NC code |
| Power requirements |
AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1) |
| Power consumption |
Approx. 200 W |
| Operating noise |
During operation: |
70 dB (A) or less (when not cutting), |
| During standby: |
45 dB (A) or less |
| External dimensions |
Width x Depth x Height: |
34.6 x 26.0 x 23.6 in. (880 x 660 x 600 mm) |
| Weight: |
105 kg (231.5 lbs.) |
| Installation environment |
Indoor use, Altitude: Up to 2,000m (6,562 ft.), Temperature: 5 to 40 ℃ (41 to 104°F), Humidity: 35 to 80 % (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporaty overvoltage: 1440 V, Long-term temporaty overvoltage: 490 V |
| Included items |
Power cord, Power plug adapter, USB cable, Manuals, Roland DG Software Package CD, Detection pin, Automatic correction jig, Pin-type material adapter, Hexagonal driver, Spanner, Milling bur holders, Milling bur positioner, Dust collection hoses, Dust collection hose adapter, Regulator, Cleaning tool, Option adapter labels, Material adapters |
