| MODEL |
LEC-540 |
LEC-330 |
| Printing method / Cutting method |
Piezoelectric inkjet / Grit roller feed |
| Acceptable media |
Width |
10.2 to 54 in. (260 to 1371 mm) |
7.2 to 30 in. (182 to 762 mm) |
| Thickness |
Printing: Maximum 39 mil (1.0 mm) with liner Cutting : Maximum 16 mil (0.4 mm) with liner and 9 mil (0.22mm) without liner |
| Roll outer diameter |
Maximum 8.3 in (210 mm) |
Maximum 7.1 in (180 mm) |
| Roll weight |
Maximum 66 lb. (30 kg) |
Maximum 44 lb. (20 kg) |
| Core diameter |
2 in (50.8mm) or 3 in (76.2mm) |
| Printing/cutting width |
Maximum 53 in (1346 mm) |
Maximum 29 in (736 mm) |
| Ink cartridges |
Type |
Roland ECO-UV INK |
| Capacity |
220 ml (± 5 ml) |
| Colors |
5 colors + Clear coat (Cyan, Magenta, Yellow, Black, White and Clear coat) |
| Configuration |
CMYK+Gloss+White, CMYK+White+White or CMYK+Gloss+Gloss |
| Ink curing unit |
Built-in ultraviolet-light emitter (UV-LED Lamp) |
| Printing resolutions |
360×720 dpi, 720×1080 dpi, 720×1440 dpi, 1440×1440 dpi |
360×720 dpi, 720×720 dpi, 720×1440 dpi, 1440×1440 dpi |
| Acceptable blade tool |
Roland CAMM-1 series cutter blade. |
| Cutting speed |
0.4 (10 mm/s) to 23.6 in/s (600 mm/s) (0.4 to 11.8 in/s in media feed direction) |
| Blade force |
30 to 300gf |
| Blade offset compensation |
0 to 0.0591 in (0.000 to 1.500 mm) |
| Software resolution (when cutting) |
0.000984 in/step (0.025 mm/step) |
| Distance accuracy (when printing) |
Error of less than ± 0.3 % of distance traveled, or ± 0.012 in (0.3mm), whichever is greater. |
| Distance accuracy(When cutting) |
Error of less than ± 0.4% of distance traveled, or ± 0.012 in (0.3 mm), whichever is greater. When distance correction ([CUTTING MENU] -[CALIBRATION]) has been preformed: error of less than ± 0.2 % of distance traveled, or ± 0.004 in (0.1mm), whichever is greater. |
| Repetition accuracy (When cutting) |
± 0.004 in (0.1mm) or less |
| Alignment accuracy for printing and cutting |
± 0.020 in (0.5mm) or less |
| Alignment accuracy for printing and cutting when reloading media |
Error of less than ± 0.5% of distance traveled, or ± 0.012 in (3mm), whichever is greater |
| Media take-up system |
Roll outer diameter |
Maximum 8.3 in (210 mm) |
Maximum 7.1 in (180 mm) |
| Roll weight |
Maximum 66 lb. (30 kg) |
Maximum 44 lb (20 kg) |
| Interface |
Ethernet (10 BASE-T / 100 BASE-TX, automatic switching) |
| Power-saving function |
Automatic sleep feature |
| Power supply |
Voltage and frequency |
AC 100 to 240 V ± 10%, 50/60 Hz |
| Required power capacity |
Maximum 5.5 A |
Maximum 4.2 A |
| Power consumption |
During operation |
Maximum 490W |
Maximum 370W |
| Sleep mode |
Approx. 15.3 W |
Approx. 15.3W |
| Acoustic noise level |
During operation |
64dB (A) or less |
| During standby |
40dB (A) or less |
| Dimensions (with stand) [6] |
115.2[W]x44.1[D]x49.6[H] in (2925[W]x1120[D]x1260[H] mm) |
86.6 [W] x 32.3 [D] x 49.6 [H] in (2200[W] x 820 [D] x 1260 [H] mm) |
| Weight (with stand) |
496 lb. (225 kg) |
390.2 lb. (177 kg) |
| Environment |
Power on |
Temperature: 68° to 90°F (20° to 32°C) (72°F [22°C] or more recommended), Humidity: 35 to 80% (no condensation) |
| Power off |
Temperature: 41° to 104°F (5° to 40°C), Humidity: 20 to 80% (no condensation) |
| Included items |
Same as LEC-330/300A plus crease tool (XD-CT) and an additional blade (ZEC-U3050) |
Stand, power cord, blade (ZEC-U5022), blade holder (XD-CH2), media clamps, replacement blade for sheet cutter, cleaning kit, Roland VersaWorks Dual software RIP, User’s manual, etc. |
