Technical Support for
VersaUV LEC-540 54" UV-LED Inkjet Printer/Cutter
Featured Articles
VersaWorks 6 UpgradeMissing Software
Expand All | Collapse All
Application & Software Guides ( 2 )
This document describes the process for calibrating or linerizing a print mode in Roland VersaWorks.
1.81 MB
Firmware ( 2 )
LEC Series Firmware version 7.30 for models LEC-300/300A/330/540
3.26 MB
LEC Series Firmware version 7.40 for models LEC-300/300A/330/540
3.26 MB
Maintenance & Calibration Guides ( 12 )
This guide explains procedure for adjusting the bidirectional calibration for VersaUV inkjet devices.
1.30 MB
Details how to ensure correct print quality by using the BiDirectional Adjustment.
1.12 MB
This document details how to perform the Media Feed Calibration. This test is crucial in removing banding from prints.
1.17 MB
Details how to perform the end user level print cut adjustment to correct print cut alignment issues.
1.37 MB
This test pattern shows how the print heads are firing and can explain many print quality issues. This document details how to perform the test print and correct possible issues that may arise.
2.27 MB
Maintenance checklist for the LEC-300, LEC-300A, LEC-330 and LEC-540.
101.75 KB
Maintenance checklist for the LEC-300, LEC-300A, LEC-330 and LEC-540.
101.75 KB
Details replacement of the sheet cutting blade for all print and cut devices.
478.01 KB
VersaUV Print Head Maintenance Guide. This document overviews best practices for maintaining print head quality on the VersaUV products.
1.30 MB
