Start "insourcing" with a Roland VersaCAMM Series printer/cutter, the right choice for your business. With a VersaCAMM, you will enjoy uncompromising 4-color print quality, high speed performance, and automatic printing and contour cutting all in one device. Best of all, you'll be fully equipped to produce the quality labels, posters and other promotional materials your business demands.
It's time to take control with the VersaCAMM.
|Printing technology||Piezoelectric inkjet|
|Media||Width||210 to 1,371 mm (8.3 to 54 in.)||182 to 762mm (7.2 to 30 in.)|
|Thickness||Maximum 1.0 mm (39 mil) with liner, for printing Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting|
|Roll outer diameter||Maximum 180 mm (7 in.)|
|Roll weight||Maximum 30 kg (66 lb.)||Maximum 20 kg (44 lb.)|
|Core diameter||50.8 mm or 76.2 mm (2 in. or 3 in.)|
|Printing/cutting width*1||Maximum 1,346 mm (53 in.)||Maximum 736 mm (29 in.)|
|Ink cartridges||Type||Exclusive Roland ECO-SOL MAX|
|Capacity||220 cc or 440 cc|
|Colors||Four colors (cyan, magenta, yellow, and black)|
|Printing resolution (dots per inch)||Maximum 1,440 dpi|
|Cutting speed||10 to 300 mm/s|
|Blade force||30 to 300 gf|
|Blade offset||0 to 1.5 mm (0 to 0.059 in)|
|Software resolution (when cutting)||0.025 mm/step|
|Distance accuracy (when printing) *2 *3||Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater|
|Distance accuracy (when cutting) *3||Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater|
|Repetition accuracy (when cutting) *3 *4||±0.1 mm or less|
|Alignment accuracy for printing and cutting *3 *5||±0.5 mm or less|
Alignment accuracy for printing
and cutting when reloading media *3 *6
|Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater|
|Media heating system *7||Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F) Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F)|
|Connectivity||Ethernet (10BASE-T/100BASE-TX, automatic switching)|
|Power-saving function||Automatic sleep feature|
AC 100 to 120 V ±10%, 7.6 A, 50/60 Hz or
AC 220 to 240 V ±10%, 3.9 A, 50/60 Hz
AC 100 to 120 V ±10%, 5.5 A, 50/60 Hz or
AC 220 to 240 V ±10%, 2.8 A, 50/60 Hz
|Power consumption||During operation||Approx. 1,030 W||Approx. 730 W|
|Sleep mode||Approx. 14 W||Approx. 14 W|
|Acoustic noise level||During operation||64 dB (A) or less||64 dB (A) or less|
|During standby||40 dB (A) or less||40 dB (A) or less|
|Dimensions||With Stand||2,310 (W) x 740 (D) x 1,125 (H) mm [90.9 (W) x 29.1 (D) x 44.3 (H) in.]||1,700 (W) x 740 (D) x 1,125 (H) mm [66.9 (W) x 29.1 (D) x 44.3 (H) in.]|
|Weight||112 kg (247 lb.)||89 kg (196 lb.)|
|Environment||Power on||Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended], Humidity: 35 to 80%RH (non-condensing)|
|Power off||Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-condensing)|
|Included items||Exclusive stands, power cord, blade, blade holder, media clamps, media flanges, replacement blade for separating knife, cleaning kit, software RIP, and user's manual, etc|
*1 The length of the production run is subject to the limitations of the software program.
*2 Using Roland specified media, print travel of 1 m, temperature: 25°C (77°F), humidity: 50%RH
*3 Not assured when the print heater or dryer is used.
*4 Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media.
SP-540i: Media over 610 mm wide and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long.
SP-300i: media 3,000 mm long.
*5 Provided that media length is under 3,000 mm. Temperature: 25°C (77°F) Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*6 Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm (SP-540i) or 736 mm (SP-300i) in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded.
During cutting, [PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F) Excludes the influence of misalignment, expansion or contraction of the media.
*7 Warm up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, the preset temperature may not be reached.
|Roland VersaWorks System Requirements|
Windows® 8/8.1 (32/64-bit);
Windows® 7 Professional/Ultimate (32/64-bit);
Windows Vista® Business/Ultimate (32/64-bit)
|CPU||Intel® Core™2 Duo, 2.0 GHz or faster recommended|
|RAM||2 GB or more recommended|
|Video card and monitor||A resolution of 1280 x 1024 or more recommended|
|Free hard-disk space||40 GB or more recommended|
|Hard-disk file system||NTFS format|
|Optical drive||DVD-ROM drive|
|ECO-SOL MAX INK||ESL3-4MG||Magenta, 440 cc|
|ESL3-4YE||Yellow, 440 cc|
|ESL3-4CY||Cyan, 440 cc|
|ESL3-4BK||Black, 440 cc|
|ESL3-MG||Magenta, 220 cc|
|ESL3-YE||Yellow, 220 cc|
|ESL3-CY||Cyan, 220 cc|
|ESL3-BK||Black, 220 cc|
|SL-CL||Cleaning liquid, 1 pc.|
|Blades||ZEC-U5022||For thick, reflective and fluorescent vinyl, 2pcs.|
|ZEC-U5025||For thick, reflective and fluorescent vinyl, 5pcs.|
|Blade holders||XD-CH3||Blade holder with blade extension abjuster, made of resin|
|XD-CH2||Blade holder with blade extension abjuster, made of aluminum|
|TU2-54||For SP-540i, rolls up to 30 kg (66.1 lb.) Can only be used during printing|
|TU2-30||For SP-300i , rolls up to 30 kg (66.1 lb.)* Can only be used during printing|
|TUC-2||Controller for TU2-54 and TU2-30 take-up systems|
*SP-300i can load a media roll weighing up to 20 kg (44 lb.)